Fully Automated Clinical Chemistry Analyser (RX IMOLA)

60 reagent positions for 20ml, 50ml and 100ml bottles
Dual 5 speed rotating stirrers rinsed with purified water
72 sample positions & 20 QC and calibrators positions
An 8 stage washing process with acid, alkali and pure water wash steps

Makes your work easier

Height	690 mm, 27in
Depth	582 mm, 23in
Width	970 mm, 38in
Weight	150 kg, 331lbs
Throughput	400 photometric tests per hour, 240 ISE tests per hour. Combined throughput of 560 tests per hour.
Analyser accreditation	CE marking in compliance with In Vitro Diagnostic Medical Device Directive 98/79/EC, FDA 510k cleared and UL certification (4~15 ºC)
Analyser type	Compact fully automated random access bench top clinical analyser
Assay tests	Endpoint, kinetic, biochromatic, turbidmetric, sample blanking, reagent blanking and ISE
Maintenance	Daily maintenance-less than 5 minutes. No rear access required. Simple twice yearly preventative maintenance service
Data management	Storage of up to 30,000 patient reports, search facility, test counter
Test channels	60 photometric channels, 3 direct ISE tests - sodium, potassium and chloride
Sleep mode	User defined sleep mode capabilities with automatic wash and instrument prep
Reagent capacity	Removable tray with 60 cooled positions (30 positions for 100 or 50ml bottles and 30 positions for 20ml bottles)
Reagent cooling	8-15°C
Reagent identification	Automatic barcode reagent identification
Reagent inventory	Calculation of remaining reagent volume and tests available, alert for shortage, expired reagent and expired calibration
Reagent pipette	Dedicated twin reagent micropipette with liquid level sensor and crash detection, rinsed inside and outside with purified water
Sample addition	Immediate sampling interruption for addition of samples via removable panel
Sample capacity	Removable tray with 72 positions for samples, 20 cooled position for controls and calibrators
Sample dead volume	150µl in standard or primary tubes, 100µl in paediatric cups
Sample dilution	Pre-dilution and automatic re-assay with diluted, reduced or increased sample volume. Dilution mixture 100 -350µl consisting of 2-35µl of sample and 20-350µl of diluent
Sample identification	Barcode sample identification
Sample pipette	Dedicated sample micropipette with liquid level sensor, crash detection, bubble detection and 4 levels of clot detection. Rinsed inside and outside with purified water
Sample tube Size	Multiple primary tube sizes (diameter 13 to 16mm, height 75 to 100 mm), paediatric cups
Sample type	Serum, Plasma, Urine, Supernatant & Whole Blood
Sample volume	2 to 35µl (0.1µl increments)
STAT sampling	mmediate STAT sampling interruption
Minimum reaction volume	150µl
Stirring speed	Dual 5-speed rotating stirrers rinsed with purified water
Stirring system	Paddle type rotating stirrer cleaned with purified water
Temperature	37°C±0.3
Cuvettes	90 reusable Pyrex® cuvettes with 5-year lifespan, min volume 150µl, Max volume 450µl, 8-stage cuvette washing system
Cuvette size	8(W) x 6.23(D) x 30(H) mm
Cycle time	9 seconds
Water consumption	18L per hour
Water requirements	NCCLS type 1 or 2 purified water supply at pressure [0.15-0.34Mpa]
Detector method	Direct absorbance in cuvette (bichromatic and monochromatic)
Detection principal	12 wavelengths: 340, 380, 415, 450, 510, 546, 570, 600, 660, 700, 750 and 800 nm
ISE tests	Integrated ISE unit
Light source	Halogen tungsten lamp (air-cooled, 6 months service life)
Quality contro	Interactive Levey-Jennings Charts, Daily, Monthly and Batch QC with data archiving, Automatic QC and Automatic calibration
Calibration principal	Factor, Linear, point to point, spline, log-logit and exponential. Up to 7 calibrators per test
Input voltage	100 - 240 Vac
Power consumption	<900 VA
UPS requirements	1230 W (analyser and PC)
LIMS connectivity	Bi-directional; ASTM standard (RS232 connection)
Operator interface	15” LCD display and printer externally connected. Windows® based user Interface 100 -249 VAC, 1230 Watt approx